Cass Technology CASTLE S SERIES Manual de usuario descargar pdf (Pagina 19)

CASTLE COMMANDO SERIES CONTROLLER – TECHNICAL OPERATION GUIDE

j. Local PIN 1

4 digits of number are required to set the Local Auto-PIN number. This is only can

be used at the specify door and when the Use Common PIN Mode is OFF.

k. Local PIN 1 TimeZone

Set the TimeZone for the Local PIN 1, so that the Local Auto-PIN 1 can be used

within the TimeZone setting.

l. Local PIN 2

4 digits of number are required to set the Local Auto-PIN number. This is only can

be used at the specify door and when the Use Common PIN Mode is OFF.

m. Local PIN 2 TimeZone

Set the TimeZone for the Local PIN 2, so that the Local Auto-PIN 2 can be used

within the TimeZone setting.

Example setting of Auto PIN Mode: -

MODE

USE

COMMON

PIN (CP)

LOCAL

PIN (LP)

STATUS

ON YES Use CP (Tz) N/A CP activated with Tz

ON OFF N/A Local Pin LP activated

OFF YES N/A N/A Both deactivated

OFF NO N/A Local Pin (Tz) LP activated with Tz

n. Security

‘ON/OFF’ value. This option is used to enable or disable the security of the system.

When the Security Mode is ON, the reader will prompt the user for the Card, Card +

PIN or Auto-PIN to access the system; if the Security Mode is OFF, the electric lock

will be released and the door is always opened until the Security Mode is set to ON

again.

CASS TECHNOLOGY SDN BHD(338857-X) 19

dd/mm DDD hh:mm:ss

Local Pin 1 [0000]

dd/mm DDD hh:mm:ss

Local Pin Tz [000]

dd/mm DDD hh:mm:ss

Local Pin 2 [0000]

dd/mm DDD hh:mm:ss

Local Pin 2 Tz [00]

dd/mm DDD hh:mm:ss

Security [ON]

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 43 44

Sin comentarios

Cass Technology CASTLE S SERIES Manual de usuario Pagina 19