Cass Technology CASTLE S SERIES Manual de usuario descargar pdf (Pagina 8)

CASTLE COMMANDO SERIES CONTROLLER – TECHNICAL OPERATION GUIDE

Special Purpose Time Zone

CASTLE-Commando has special TimeZone, namely:

a. Door #1 to Door #16 Auto Lock Release TimeZone

b. Door #1 to Door #16 Local PIN Mode TimeZone

c. Door #1 to Door #16 Card + PIN Mode TimeZone

d. Pin Mode TimeZone

e. General Purpose Output TimeZone

f. Sensor / Alarm Arm TimeZone

a. Door #1 to Door #16 Auto Lock Release TimeZone

The Automatic Lock Release Time Zone can be programmed to lock or unlock the

electric door for certain time periods. One of these features is to unlock the office

main door during office hours. After office hours, the door will be locked and users

will need to swipe their cards to enter the office.

b. Door #1 to Door #16 Local PIN Mode Time Zone

Each door (Door #1 to Door #16) can be set to its own PIN number separately.

There are two sets of PIN number to be set into each reader. The Local PIN Mode

Time Zone is used to specify the time periods when the user will need to enter the

PIN number for the specify door to access the door. Outside the PIN Mode

TimeZone, the user will not allowed to use the PIN to enter the premises.

c. Door #1 to Door #16 Card + PIN Mode TimeZone

The Card + PIN Mode TimeZone is used to specify the time periods when the users

will need to swipe their cards AND enter the PIN numbers. Outside the CARD + PIN

Mode TimeZone, the user will only need to swipe their card to gain entry. PIN entry

is not required.

d. PIN Mode TimeZone

This is a Common PIN number set in the controller. All the readers are sharing this

PIN number. The PIN Mode TimeZone is used to specify the time periods when the

user can enter the secure area by entering a PIN number. Outside the PIN Mode

TimeZone, the user will not allowed to use the PIN to enter the premises.

e. General Purpose Output TimeZone

This is a relay output that can be used for general purposes. It can be used for

controlling the lighting or ventilation systems. It can be turned ON/OFF manually or

by TimeZone controlled (Use an external relay with higher ampere).

f. Sensor / Alarm Arm TimeZone

Sensor / Alarm Arm TimeZone is used to automatically arm and disarm the alarm

system. This feature is useful for automatically arming the alarm system after office

hours and disarming during office hours. Manual arming and disarming is also

possible by entering a 6-digit arming/disarming password at the readers.

CASS TECHNOLOGY SDN BHD(338857-X) 8

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 43 44

Sin comentarios

Cass Technology CASTLE S SERIES Manual de usuario Pagina 8