Cass Technology CASTLE S SERIES Manual de usuario descargar pdf (Pagina 37)

CASTLE COMMANDO SERIES CONTROLLER – TECHNICAL OPERATION GUIDE

Changing Password

Press ‘1’ to select [1-CH Pass] menu from the Maintenance Menu.

This menu item is to change the Programming password. The user can only

change the password of their level. To change the password, user just keys in the

new 6 digits password. ‘0’ to ‘9’ are available.

Set String

Press ‘2’ to select [2-Set Str] menu from the Maintenance Menu.

This menu is to change the display message at the controller LCD display. The

default is Cass Technology.

To enter numbers, press the ‘0’ to ‘9’ keys.

To enter the ‘A’ to ‘Z’ alphabets, press one of the ‘A’, ‘B’, or ‘C’ keys followed by

the ‘0’ to ‘9’ keys. The ‘0’ to ‘9’ keys has the alphabets labeled at the bottom of

the key.

 Pressing ‘A’ followed by the numbers key will select first alphabet labeled

under this key.

 Pressing ‘B’ followed by the numbers key will select second alphabet labeled

under this key.

 Pressing ‘C’ followed by the numbers key will select third alphabet labeled

under this key.

Testing

Press ‘3’ to select [3-Test] menu from the Maintenance Menu.

Then the controller will display the following: -

CASS TECHNOLOGY SDN BHD(338857-X) 37

dd/mm DDD hh:mm:ss

1-Test kpd 2-Test WD

dd/mm DDD hh:mm:ss

2-Test WD 3-Test IP

dd/mm DDD hh:mm:ss

3-Test IP 4-Test OP

dd/mm DDD hh:mm:ss

5-Rd Stat 0-Main

dd/mm DDD hh:mm:ss

4-Test OP 5-Rd Stat

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 43 44

Sin comentarios

Cass Technology CASTLE S SERIES Manual de usuario Pagina 37