Cass Technology CASTLE S SERIES Manual de usuario descargar pdf (Pagina 27)

CASTLE COMMANDO SERIES CONTROLLER – TECHNICAL OPERATION GUIDE

Installing Card

Press ‘1’ key to select [1-Install] menu from Database Menu.

This menu item is to install cards. When user select this menu item, controller will

display the following: -

Enter the starting card numbers that want to be installed.

For example: -

The card number ‘123456’ is to be installed. Press number of the card number using

the keypad. The LCD display will then display: -

If the user wants to install 1 card, he/she just has to press the ‘ENT’ key to accept and

go to next mode. If the user wants to install 50 cards from 123456, he/she has to add

up 123456 with 50, that is 123506. Then he/she just keys in the number 123506 into the

End Number.

After that, the LCD display will then display: -

This is where the Access Level of the card is set.

If the user wants to change the Access Level of the card that already installed, he/she

just can re-install the card and select an Access Level again for the card.

Delete Card

Press ‘2’ key to select [2-Delete] menu from Database Menu.

This menu item is to delete user card one by one. When user select this menu item, the

controller will display the following: -

Key in the numbers of the card that wants to be deleted.

CASS TECHNOLOGY SDN BHD(338857-X) 27

dd/mm DDD hh:mm:ss

Start [000000]

dd/mm DDD hh:mm:ss

End [123456]

dd/mm DDD hh:mm:ss

Acclvl [001]

dd/mm DDD hh:mm:ss

Card #[000000]

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 43 44

Sin comentarios

Cass Technology CASTLE S SERIES Manual de usuario Pagina 27